Rock particles, machine cleaning and maintenance
Detergent preparation of standard operating procedures to the preparation of a good cleaning agent: 1% detergent solution or 1% detergent solution. Disinfectant preparation of standard operating procedures, the preparation of a good disinfectant: 75% ethanol or 2 the ‰ Bromogeramine liquid. Ready to clean utensils: nylon brush, cloth (mercerizing towels), stainless steel blade.
(2) cleaning procedures
2.1 production ended, remove the rock particles machine bearing, scraping the powder axis, roll axis, mesh, stainless steel blade drugs fouling removal, the removed rock particles, the various components immersed in drinking water with a nylon brush to wash away the fouling.
2.2 with a rag dipped in the cleaning agents to clean the various components to the non-fouling, and cleaning agents with purified water rinse (clean mercerized towel to wipe dirty marks).
2.3 rock particles inside and outside the machine at the surface rinse with potable water.
2.4 with a clean cloth dipped in detergent will clean both inside and outside surface of rock particles, local host to fouling.
2.5 with purified water to rinse the cleaning agent of the inner and outer surfaces of rock particles, local host (clean mercerized towel to wipe dirty marks).
2.6 clean mercerized towel dipped in disinfectant disinfection host internal and external surfaces of the various components and rock particles machine, ten minutes later with purified water rinse to remove disinfectant (75% ethanol for disinfection, do not remove).
2.7 will be cleaning good rock particles, the various parts of the machine to replace the machine and set aside.
The disinfectants monthly to be used interchangeably.
Cleaning and disinfection is completed, the cleaning tool according to the cleaning tool standard operating procedures (SOP-WS-012-00) for cleaning store.
5 After cleaning, hung on the host "clean" state license.
Cleaning cycle: the production of the same species, according to the clearance standard operating procedures (SOPs-SC-018-00) to clean up; the replacement of species, click here to procedures to be cleaned; if the device is disabled for more than three days, and then when its contact with the site of the drugs shall be disinfected. |
Rock particles, machine cleaning and maintenance？