The working principle and scope of application of the channel mixer
The channel mixer is the role of mechanical force and gravity, two or more materials uniformly mixed up machinery. Channel mixer can be a variety of materials with a uniform mixture, such as in the pharmaceutical industry, the raw materials uniform mixing of different ingredients together to form a compound; can also increase the material contact surface area, in order to promote the chemical reaction; also able to accelerate the physical changes , such as granular solute in a solvent, can accelerate the dissolution of the role of mixed mechanical mixing.
Channel mixer works: channel mixer through mechanical transmission, the S-type impeller rotation, flip promote material back and forth, mixing, electrical control operation, you can set the mixing time, to automatically shut down, electric material down , thereby enhancing the mixed quality of each batch of material, to achieve high uniformity of mixing.
Channel mixer channel mixer scope of application: This machine is made of stainless steel, widely used in the mixing of powdery or paste material in pharmaceutical, chemical, food industry and other industries.
Works and construction of rock particles
Rock particles machine developed wet powder or lumps of dry material into the desired particles, mainly wet powder mixture, are in the rotating drum, counter-rotating role, mandatory through the sieve made of particles dedicated devices.
The principle of the rock particles: the rock particles machine humidity suitable powder mixture into the hopper, cutter wheel swing back and forth, with the swing role of the rotating drum, through a wire sieve, wet powder raw materials, research into particle material from mesh extrusion, granulated. Bulk material in the drum, impact crusher, and force through sieve made of particles.
Rock particles, the structure:
Body: body is an independent rectangular cylinder on the device closed bearing and powder bucket connection, pink bucket toward the body.
, Particle manufacturing equipment: rotating drum lying set the bucket in the powder below, front and rear bearing supports for the inverted rotary rack drive, the end of the bearing cap is movable assembly and disassembly, as long as the spin under a wing nut, the bearing cap and rotating drum to be pulled out, place the roller at both ends of the system has a convex side ring.
Gearbox: worm gear drive, inside the reservoir oil, the endoscope can be observed on the box, to observe the functioning of the oil reserves, the worm outer end, equipped with the eccentric shaft, driven by the rack for reciprocating movement.
4, folder sieve tube: device on both sides of the rotary drum, steel pipe manufacturing, in the middle to open a long trough, both ends of the embedded slot of the screen, turn the flower-shaped hand wheel will screen wrapped in a cylindrical rotating drum hand wheel, gear shore, tightness can be adjusted.
5, the motor frame: a screw bolt firmly, the motor mounted on the iron, when the rotation of the screw bolt, the motor up and down movement for adjustment of belt. |
Described the working principle and structure of the channel mixer and rock particles