XF series horizontal fluid bed dryer, also known as fluidized bed dryer, after 30 years of use, improvements in the pharmaceutical, chemical, food, food processing, more and more reflects its important role. XF Series horizontal-fluid bed dryer, host of the fluidized bed cyclone air filter, bag filter, high pressure centrifugal fan, console composition. Work, clean hot air through the valve plate assigned to enter the bed body, wet material from the feeder into the hot air form a boiling state. Extensive contact with the hot air and the material, increase the heat and mass transfer process in a relatively short period of time can dry. One to enter the body from the bed, after tens of seconds to several minutes to boil dry, automatic outflow from the other end of the bed. This equipment is generally negative pressure operation. XF series horizontal boiling characteristics of the dryer: automation of production, continuous drying equipment. Fast drying, low temperature, to ensure product quality, in line with the GMP requirements of pharmaceutical production. Steam, electricity, hot stove can be equipped with.
The dry nature of the materials supporting the dust removal equipment according to needs, select cyclone, cloth until the dust collector. Can also choose one of them. In general, a large proportion of the material simply select the cyclone. The proportion of lighter materials must be configured to set the bag filter and alternate air force feeding device selection.
The XF series horizontal fluid bed dryer Features:
A large contact area in the material and the drying medium, at the same time the material in the bed continuous intense agitation, so the effects of heat transfer, heat capacity coefficient;
2, due to the fluidized bed temperature distribution, in order to avoid local overheating of the product to, so particularly suitable for certain heat-sensitive materials dry;
3, in the same equipment for continuous operation, intermittent operation;
Material residence time in the dryer, as needed to adjust, so the product moisture content and stability;
5, the drying unit itself does not include mechanical moving parts, so a smaller investment in equipment cost, maintenance workload.
The XF series horizontal fluid bed dryer range of applications:
Of medicines, chemical raw materials, food, food processing, feed drying. Such as: raw material medicine, tablet particles, Chinese medicine, health food, beverage granules, corn germ, feed, plastic resin, citric acid and other powder, granular materials, dry dehumidifier. Applicable to the material particle size of 0.1-6mm, the optimum particle size 0.5-3mm.
XF series horizontal-fluid bed dryer Installation Instructions:
* Device must be placed flat foot screws, various components of a good seal.
※ fan can be placed outdoors or in self-built silencer room. Discretion to adjust the layout depending on the circumstances.
FG series vertical-fluid bed dryer
FG series vertical boiling dryer principle
The machine adopts the fluidized vertical bed, around damper cleaning of dust structure, the general non-mixing device.
The FG series vertical fluid bed dryer features
1, liquid drying, heat and mass transfer
2, operating in the vacuum-assisted closure, no dust flying
3, antistatic filter material, and safe operation
4, the device no dead ends, thorough cleaning, no cross-contamination
5, to meet GMP requirements
FG series vertical boiling range of applications of the dryer
The FG series vertical boiling dryer is mainly used for medicine, food, chemical and other industries, dry powder or granular materials. |
Horizontal boiling dryers and vertical fluid bed dryer what is the difference?